Betco Unlock No-Rinse Floor Stripper
Concentrate Liquid - 640 fl oz (20 quart) - 1 Each - Clear
-
Powerful formula cuts through layers of old finish in minutes
-
Pleasant to Use: Low to no odor released.
-
Saves Energy: Works with cold water.
-
Low Foaming
About this product
Concentrate Liquid - 640 fl oz (20 quart) - 1 Each - Clear
-
Powerful formula cuts through layers of old finish in minutes
-
Pleasant to Use: Low to no odor released.
-
Saves Energy: Works with cold water.
-
Low Foaming
|
Betco Corporation |
|
888B500 |
|
http://www.betco.com
|
|
Betco |
|
Unlock |
|
Unlock No-Rinse Floor Stripper |
|
Unlock Floor Stripper cuts through layers of old finish in minutes. High-power, high-speed floor stripper was developed to penetrate and remove multiple coats of burnished floor finish with a minimum of labor. Suitable for use on most surfaces, this fast-acting, labor-saving product requires little, if any, scrubbing and greatly reduces the time it takes to strip a floor. Powerful, professional stripper requires no neutralizing or flood-rinsing after use. Low-foaming formula works with cold water, saving energy. Little to no odor is released during use so it is pleasant to use. Each gallon covers 400 square feet. Dilution varies from 1:12 to 1:5 according to application. |
|
1 Each |
|
Floor Stripper |
|
640 fl oz (20 quart) |
|
Finish Remover |
|
Recommended for removing multiple coats of water-based acrylic floor finishes from all types of resilient tile and hard surfaces. Not recommended on linoleum or sheet vinyl floors. Pre-test in a small area; color bleeding or discoloration may occur on linoleum, rubber tile, or asphalt tile. Sweep or dust mop floor to remove any large debris. <br /><br />For light to medium stripping, dilute 10 oz. /gal. (1:12). <br /><br />For heavy stripping, dilute 25 oz. /gal. (1:5) with cool water. <br /><br />Apply solution liberally to floor surface. Allow 3 - 5 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low speed rotary machine, automatic scrubber or stripping machine. Pick up solution with a wet vacuum, automatic scrubber or mop and bucket and thoroughly rinse the floor. Allow floor to dry completely before applying finish or sealer. No flood rinsing is necessary if surface appears free of dust and residue. |
|
Floor |
|
Fast ActingLow Foaming |
|
Clear |
|
Clear |
|
No |
|
No |
|
United States |
